MasterownerTemp
Serial Number: [SERIAL]
Model: [MODEL]
Series: [SERIES]
Build Name: [BUILD NAME]
Completion Date: [COMPLETION DATE]
Built In: Airdrie, Alberta, Canada
Verified Vokey Instrument
Original Build Specification:
Body Wood: [BODY WOOD]
Neck Wood: [NECK WOOD]
Fretboard: [FRETBOARD]
Scale Length: [SCALE]
Radius: [RADIUS]
Frets: [FRETS]
Nut: [NUT]
Finish: [FINISH]
Neck Finish: [NECK FINISH]
Pickup Configuration: [PICKUP CONFIGURATION]
Pickup Set: [PICKUP SET]
Controls: [CONTROLS]
Bridge/Tremolo: [BRIDGE/TREM]
Tuners: [TUNERS]
Strap Hardware: [STRAP HARDWARE]
Strings: [STRINGS]
Case: [CASE]
Factory Setup Reference
Factory Tuning: [TUNING]
Factory String Gauge: [STRING GAUGE]
Neck Relief: [RELIEF]
Action, Treble Side: [TREBLE ACTION]
Action, Bass Side: [BASS ACTION]
Pickup Height: [PICKUP HEIGHT NOTES]
Intonation: Set at final inspection
Controls and Electronics
This instrument uses an HH pickup configuration with master volume, master tone, and a 3-way pickup selector.
Selector positions:
1. Bridge pickup
2. Bridge and neck pickups
3. Neck pickup
If equipped with a push/pull control, pulling the tone knob activates the coil split.
This instrument uses an HSS pickup configuration with master volume, master tone, and a 5-way pickup selector.
Selector positions:
1. Bridge humbucker
2. Bridge split with middle pickup
3. Middle pickup
4. Middle and neck pickup
5. Neck pickup
This instrument uses Colin Ross Signature Cain & Abel pickups with a master volume, master tone, 3-way selector, and push/pull coil split on the tone control.
Push the tone control down for full humbucker operation.
Pull the tone control up to activate the coil split.
Care and Maintenance
This instrument is finished in nitrocellulose lacquer. Nitro is thinner and more reactive than many modern catalyzed finishes, and it should be treated with care.
Avoid prolonged contact with rubber, vinyl, foam, synthetic straps, guitar stands with unknown padding, and strong solvents. Use a clean microfiber cloth for routine cleaning.
Do not leave the instrument in a hot vehicle, direct sun, or extreme cold. Allow the guitar to acclimate in its case before opening after major temperature changes.
Seasonal movement is normal. Small adjustments to relief, action, or intonation may be required as humidity changes.
Mono-Chassis Pickguard System
This instrument uses the Vokey/Stageline mono-chassis pickguard system. The electronics are mounted to the guard as a serviceable assembly.
If removing the guard, work slowly and avoid pulling against the bridge ground or output wiring. If the instrument includes quick-disconnect wiring, confirm the connectors are fully seated before reinstalling the guard.
If you are unsure, contact Vokey Guitars before removing the assembly.
Warranty and Support
For setup questions, service, replacement parts, or support, contact Vokey Guitars with your serial number.
Please include:
- Serial number
- Current tuning and string gauge
- Photos or video of the issue
- Any recent changes to setup, wiring, hardware, or environment